SCHTH-001 24VAC Floor Heating Thermostat with Sensor

  • $240.00
In stock (998 items available)

The SCHTH-001 is a hydronic heating thermostat with an external temperature sensor featuring a 4.3’’ touch sensitive and user-friendly LCD display

Featuring

  • Radiant     Floor Heating
  • Pulse     Width Modulation
  • Floor     Temperature Control
  • Floor     Temperature Display
  • Backlight
  • Included     Floor Sensor         

Specifications

Thermostat       SCHTH-001 Single Zone Heat       Only
Control
Microprocessor control. 
Packaged Weight
0.97lb(440g)
Dimensions
136 x 94 x 26mm
Enclosure
White PVC Plastic
Ambient Conditions
Indoor use only, 32 to 122 (0 to       50),       RH90%       non-condensing
Power
24V AC, 50/60HZ, 1.8va Standby, 56VA max fully loaded,       Class 2
Relay
30V 2A, Class 2 circuits
Sensor
NTC thermistor, 10KΩ@77 (25℃±0.2β=3950
Operating range
-58 to 140 (-50 to       60 ℃)
Warranty
Limited 2 Year


Important!

  1. During the installation avoid dropping or otherwise damaging the Thermostat. In case of manufacturing defects please contact your vendor.

ON/OFF Settings                        

   When the thermostat is powered on, it     displays the default information. Press again to toggle it off.


   Temperature     Setting                                  

While     in default display mode, press  or to set the target floor     temperature. After adjusting the temperature, the thermostat will     automatically save the setting in 3 seconds if no other buttons are     pressed. The temperature range is adjustable from 5~60 (41-140).


   Call for     Heat                       

      1. When the floor’s temperature drops 1/2     lower than the preset temperature, the thermostat will call for heat and     the display will show: Heat on.

      2. When the floor’s temperature is 1/2     higher than the preset temperature, the thermostat will stop calling for     heat and the display will change to: Heat off


When the thermostat is OFF: press to enter the configuration interface. Default values and options are below:


NO.
Parameter
Setting   Range
Default
Note
000
Temperature   Calibration
-5~5-10~10
0

001
Backlight
0,1
0
0:   OFF               1: ON
002
Celsius/   Fahrenheit
0,1
1
0:        1: ℉
003
Key   Volume
0,1
1
0:   Mute 1: ON
004
Thermostat   ON or OFF after power loss
0,1,2
0
0:   OFF   1: ON 2: Last State
005
Version   No.
10
10

006
Factory   Reset
0~255
52
To reset change to 55 and press 
Qty:  
  • SKU
    SCHTH-001

We accept the following payment methods:

  


Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart